The CF-Card Reader is essentially a miniaturized version of the Standard Reader with a Compact Flash connector. Besides the physical size and Host interface, the only other functional difference between the two Readers is that the CF-Card Reader does not have any input contacts or output relays.

The CF-Card Reader receives all RFID data transmitted by a tag. It deciphers this data and sends the information in real-time to the Host. Depending on the application, the Host can use this information to control access to restricted areas, quickly find assets in a facility, or update inventory counts in a warehouse. When searching for specific items, the CF-Card Reader can turn on optional tag LEDs and buzzers to make finding items much easier.

Along with the rest of our products, the CF-Card Reader was designed for easy setup, configuration, and use. When the Reader is connected, it will automatically be recognized be the Host. When the Host application sends a general reset command to the Reader, the Reader will respond with a power-up message to the Host. This message contains the Reader's address which can be changed by the user.

Optional colorful LEDs on the CF-Card conveniently indicate the Reader's operation at all times.

Two RF frequencies are used by the Reader to communicate to the system. The Reader transmits data using one frequency and receives data using a different frequency. This dual-frequency method allows for fast and reliable full-duplex communications.

For data integrity, all communication packets used by the Reader use parity bits and cyclic redundancy checks. These safeguards ensure that all data remains accurate.

Specifications

• Operation Frequency: 433 MHz

• Multitag Read Capability

• Range: 8m to tag; 15m from tag (internal antennas)

• Interfaces: Compact Flash - Type II

• Power: 5Vdc via Host Compact Flash interface

• Dimensions: 92 mm x 43 mm x 16

• Weight: 36.9 g

• Material: ABS (Package) / PET (Surface)

• Operating Temperature -35C to +50C

• Storage Temperature -40C to +85C